Precision Farming / Receivers & Modems

Receivers & Modems

AFS Vector Pro

AFS Vector Pro

AFS VectorPro receiver streamlines guidance correction options whether it's cellular, satellite or radio delivered. Efficiency is accomplished with pass-to-pass (P2P) and year-to-year repeatability paired with proven AccuGuide performance and complemented by a simplified setup process.

  • Base accuracy levels: WAAS and AFS 1
  • Medium accuracy levels: AFS 2 and AFS 3
  • High accuracy levels: RTK and AFS RTK+

AFS 372

AFS 372

AFS 372 GNSS receiver uses GPS/GLONASS signals and is capable of a wide range of accuracy levels.

  • Base accuracy levels: WAAS, Omnistar VBS, Rangepoint RTX
  • Medium accuracy levels: OmniStar HP and G2, Centerpoint RTX
  • High accuracy levels: CenterPoint, RTK+, Trimble Ag RTK Base

AFS 252 & 262

AFS 252 & 262

Older versions of the AFS 372, they have had their last software updates written and are in their end of life. In order to use RTK with these receivers, a 900 or "Joey" radio is the only options. They do not support modern features.


NAV-900

NAV-900

All in one nav controller and receiver that mounts to roof of cab. Contains an integrated 3-axis Inertial Measurement Unit (IMU) which provides terrain compensation and roll corrected position

  • Supports WAAS, RangePoint/CenterPoint RTX, and AFS RTK+
  • Compatible with modems for NTRIP RTK or radio delivered RTK

AG-820 RTK Radio

AG-820 RTK Radio

The AG-820 radio was designed for use with the NAV-900 GNSS receiver and guidance controller, providing access to radio-based RTK networks.


AG-715 RTK Radio

AG-715 RTK Radio

The AG-715 integrated radio was designed exclusively for use with the AFS 372 GNSS receiver, providing access to high-precision RTK networks.


900 Radio 'Joey'

900 Radio "Joey"

The Joey radio has the same functionality as the AG-715 and will work with an AFS 372 Receiver but will also work with the older AFS 252 and AFS 262 receivers. It mounts under the receiver unlike the AG-715, which mounts inside.


Processing and Connectivity Module (PCM)

Processing and Connectivity Module (PCM)

The PCM comes factory installed in Case IH equipment 2019 and newer. This modem is required for AFS connect and file transfer. We have the ability to install this modem on older units to connect them to your fleet. Contact our AFS team with any questions you may have on connectivity.

Off vehicle connectivity is facilitated through a 4G Integrated cellular modem. The PCM contains 32GB of memory, meaning that a USB memory card is not necessary for precision farming systems operations. The PCM also has an integrated GNSS receiver used for reporting vehicle position for purposes of telematics.


AM-53 Modem

AM-53 Modem

The AM-53 Modem transports NTRIP correction data via cellular from a correction source such as the AFS RTK+ network or other CORS/VRS service. Most have come to be replaced by the PCM.


Modem GX450 Wi-Fi

Modem GX450 Wi-Fi

With 4G/LTE support and 3G backup, the GX450 Modem provides excellent connectivity for cellular RTK corrections.
Advantages:

  • Bring your own data plan, giving you the flexibility to choose the plan that best fits your operation
  • The compact size allows the GX450 to be easily mounted in the vehicle cab
  • Easily configurable through the AFS Pro 700 when used with the AFS 372 GNSS receiver
  • Utilize built-in Wi-Fi to connect internet capable devices in the cab

Compatible with:

  • AFS Pro 700
  • XCN-2050
  • FM-1000
  • XCN-1050
  • FM-750
  • AFS 372

SiteNet 900

SiteNet 900

The Trimble SiteNet radio modem enables you to establish a robust, wireless data broadcast network for real-time, high-precision earth moving applications.